after opening the drivers door the window will go up and down multiple times
sometimes up position right before the door is closed, not good
any thoughts?
thanks
Harlan
#102

Hi Harlan,
There is a page in the owner's manual regarding resetting the door windows after a battery change. A plug is pulled and reconnected on the right side of the engine compartment and several steps of opening doors and operating windows will allow the window micro switches to reset. I had to do this after the battery ran down and replacing the battery. The computer for the engine will have to do a relearn after this.
The red #150 is doing fine in Seattle.
Charles

Harlan...did you get it sorted..???

John

Hans
I was able to reprogram the both the door switches by holding down the switches
for 2 seconds in the up position and and 10 seconds in the down position
that seems to have cured the problem
thanks
Harlan

this Halloween day the gremlins have returned to the Mangusta
now the drivers side window goes up and down after the door is opened
and sometimes does not return to the open door position making closure
of the door very difficult
is there a sensor in the door lock mechanism?
thanks for the help
Harlan
#102

Harlan...more than likely the small spring on the door latch may have slipped of the plunger. Door panel needs to come of and door latch pulled out.

John

Hans
thanks for the suggestion
but as you know the Mangusta does not like the cold weather, well neither do I
anyways I have put it up for the winter in a friends garage, cover and trickle charger
so the window will need to wait until the spring
hope all is well
Harlan